Center Enamel: EPC Contractor for Palm Oil Wastewater Treatment Project in Myanmar

Myanmar is gradually emerging as a key palm oil producer in Southeast Asia, with large-scale oil palm cultivation and processing across Tanintharyi, Mon, and Rakhine regions. As the industry expands, environmentally sound waste management has become a mandatory requirement for sustainable operation. A professional Palm Oil Wastewater Treatment Project is critical for palm oil mills to meet local regulations, protect ecosystems, and realize biogas energy recovery.

Center Enamel (Shijiazhuang Zhengzhong Technology Co., Ltd) acts as a reliable Palm Oil Wastewater Treatment Project EPC Contractor, providing full turnkey solutions with advanced anaerobic technologies including USR Process to support the green development of Myanmar’s palm oil industry.

 

 

Generation and Environmental Hazards of Palm Oil Mill Wastewater

Palm oil mill effluent (POME) is mainly generated from fruit sterilization, oil extraction and clarification, and equipment washing. Without proper treatment, POME brings severe risks to Myanmar’s rivers, mangroves, and agricultural land:

  • Extremely high organic strength: COD reaches 40,000–80,000 mg/L, causing serious oxygen depletion in water bodies.
  • High oil and grease: Oil slicks block sunlight and gas exchange, killing aquatic organisms.
  • High suspended solids: Fibers and sediment cause pipeline blockage and equipment wear.
  • Acidic and high temperature: pH 4–5 and temperature 40–60°C accelerate corrosion and reduce treatment stability.

For Myanmar palm oil producers, investing in a compliant Palm Oil Wastewater Treatment Project is essential to avoid legal penalties and ensure long-term business stability.

 

 

Advanced Anaerobic Technologies for Myanmar Palm Oil Wastewater Treatment

Center Enamel provides a complete set of anaerobic treatment solutions customized for Myanmar’s palm oil mills, with USR Process as the core technology, supported by CSTR, UASB, and IC systems.

1. USR Process (Upflow Solid-state Reactor)

The USR Process is specially optimized for POME with high suspended solids and oil content. It uses hydraulic upflow to maintain a high-concentration sludge bed without mechanical stirring.

  • Advantages: Strong shock resistance, low energy consumption, easy operation, high tolerance to oil and fiber.
  • Application: Ideal for small-to-medium palm oil mills in Myanmar seeking stable and low-cost operation.

2. CSTR Process (Completely Stirred Tank Reactor)

CSTR uses mechanical agitation to fully mix sludge and wastewater, preventing crusting and sedimentation.

  • Advantages: Strong handling of high-solid waste, stable biogas output.
  • Application: Suitable for large-scale mills and zero-waste integrated facilities.

3. UASB Process (Upflow Anaerobic Sludge Blanket)

A mature and widely used technology that achieves high-efficiency organic removal through a granular sludge bed.

  • Advantages: Reliable performance, high COD removal rate.
  • Application: For mills with relatively low suspended solids and liquid-phase treatment.

4. IC Process (Internal Circulation)

IC is a high-rate anaerobic reactor with loading rates 3–5 times higher than traditional systems.

  • Advantages: Compact footprint, ultra-high treatment efficiency.
  • Application: For large modern palm oil industrial hubs.

With customized pretreatment including oil separation, fiber removal, and pH adjustment, Center Enamel ensures stable performance of every Palm Oil Wastewater Treatment Project.

 

 

Core Advantages of Center Enamel in Myanmar Palm Oil Wastewater Treatment

As a professional Palm Oil Wastewater Treatment Project EPC Contractor, Center Enamel offers unique strengths for the Myanmar market:

  • Proprietary enamel formulas: Over 200 patented recipes provide superior corrosion resistance to acidic and oily POME.
  • Asia’s largest GFS tank production base: Automated manufacturing ensures quality and short delivery to remote sites.
  • International certifications: Comply with ISO 28765, AWWA D103-09, OSHA, NSF/ANSI 61; 1500V spark test for each plate.
  • Localized design: Adapted to tropical humidity, coastal salt spray, monsoon, and seismic conditions in Myanmar.
  • Full-lifecycle EPC service: One-stop solution from design, production, installation to commissioning and after-sales.

  

 

Key Equipment for Palm Oil Wastewater Treatment by Center Enamel

Center Enamel provides high-durability equipment designed for POME’s harsh environment:

1. Glass-Fused-to-Steel (GFS) Tanks

GFS tanks are the core of anaerobic systems, fused at over 820°C.

  • Corrosion resistance: pH 1–14 wide range resistance to acids, oil, and chemicals.
  • Seismic & UV stability: Bolted structure is more flexible than concrete; resistant to strong sunlight and rain.
  • Application: Anaerobic reactors, biogas digesters, effluent storage.

2. Fusion Bonded Epoxy (FBE) Coated Tanks

Used for equalization tanks and treated water storage with cost-effective anti-corrosion performance.

3. Biogas Storage and Utilization Equipment

  • Double Membrane Gas Holders: High air tightness for safe biogas storage.
  • Biogas desulfurization and power generation units: Convert biogas into on-site electricity and heat.

4. Tank Roof Systems

  • Aluminum Dome Roof: Windproof, rainproof, salt-spray resistant, ideal for tropical Myanmar.
  • Enamel Roof, Air Membrane Roof, FRP Roof, and Sun Panel Roof for various needs.

 

 

Why Center Enamel Is the Preferred Palm Oil Wastewater Treatment Project EPC Contractor

Myanmar palm oil enterprises choose Center Enamel for these key benefits:

  • Professional POME treatment experience: Deep understanding of high-oil and high-fiber wastewater ensures stable operation.
  • Full EPC responsibility: Single-point management reduces risks and shortens construction period.
  • Biogas energy recovery: Turn waste into revenue and reduce factory operating costs.
  • Remote-site capability: Adapt to Myanmar’s terrain and infrastructure for timely delivery.
  • Long service life: GFS tanks last decades with low maintenance, high ROI.

 

 

Efficient Installation Process for Rapid Commissioning

Center Enamel’s modular bolted tank technology enables fast installation even in remote areas:

  • Factory prefabrication: All components are precision-made in-house.
  • Hydraulic jacking system: Top-down installation without high scaffolding or heavy cranes.
  • Zero on-site welding: Bolted assembly avoids humidity-related welding defects.
  • Fast commissioning: No concrete curing time; put into use much earlier than traditional methods.

This efficiency helps mills meet production schedules and environmental compliance.

 

 

Successful Project Cases in Southeast Asia

Case 1: Malaysia Palm Oil Mill Effluent (POME) Treatment Project

Tank Dimensions: Ø18.33 m × 8.4 m

Number of Tanks: 5 GFS Tanks

Installation Duration: 7 personnel, 100 days

Installation Date: June 2013

Case 2: Indonesia Palm Oil Wastewater Treatment Project

Application: Anaerobic Reactors for Palm Oil Wastewater Treatment Plant

Tank Models: Ø17.58 × 8.4 m, Ø16.82 × 7.2 m

Number of Tanks: 3 GFS Tanks

Installation Date: 2013

 

 

Conclusion

Myanmar’s palm oil industry is moving toward standardized, green, and sustainable growth. A high-performance Palm Oil Wastewater Treatment Project has become a core competitive advantage. Center Enamel, as a professional Palm Oil Wastewater Treatment Project EPC Contractor, provides complete solutions based on advanced anaerobic technologies including USR Process, high-quality GFS tanks, and full-lifecycle EPC management.

By cooperating with Center Enamel, Myanmar palm oil enterprises can meet strict environmental regulations, protect local ecosystems, recover biogas energy, and enhance long-term business viability. We are committed to becoming the most reliable EPC partner for Palm Oil Wastewater Treatment Project in Myanmar and supporting the local palm oil industry’s sustainable development.